User’s Manual Suresafe
SH-055DR, SH-055DRV
Superior sensitivity RF Signal Detector * with Analog I Digital select switch
* Exposing Spy Camera, Bug, Cellular Phone and Bluetooth. etc.
Thank you for purchasing the Suresafe RF (Radio Frequency) Signal Detector. Please first read over this manual for proper use, save this manual and keep it handy.
GENERAL
This device applies with fuzzy scanning technology to detect peeping cameras, bug, cellular phones and other radio frequency devices. This device surely avoids being peeped or tapped to protect privacy or protect information being disclosed secretly.
This device has 3 LEDs. When to detect cellular phone or peeping camera, the LED will light from Levell to Level 2 to Level 3, and the beeping sound will change from Slow to Rapid indicating the strength of detected signal.
· SH-055DR: This model also has SILENT detection to reduce the embarrassment of beep sound whenωscan an environment.
· SH-055DRV: This model also has VIBRATING detection to warn you when you do not hold this device in handωscan an environment.
· Besides, you also can detect by earphone hearing without others’ awareness. This device has a new digital amplifier to heighten the indication for the digital signals of Bluetooth, WLAN, Wi-Fi, cellular phone and Digital Spread Spectrum products, etc.
PRINCIPLE PARTS
HOW TO OPERATE
1. Slide and remove the battery lid, install two AAA/UM -4 batteries matching correct (+) and (一) poles as indicated, then slide the battery lid back.
2. Pull out the antenna and turn on the switch to upper side.
3. The power LED (Green) will be lit up to confirm the detector is operated correctly.
4. If the strength indication LED is lit up and the buzzer goes off, adjust the sensitivity by tuning the Sensitivity Tuner to一(minus) side to decrease the sensitivity until the Levell (Yellow) LED slightly lights up.
5. When the detector detects a cellular phone or wireless hidden camera, the strength of indicator will be lit up, from Levell (Yellow) -> Level 2 (Yellow) -> Level 3 (Red) indicating the strength of detected signals.
6. Meanwhile, the buzzer will be beeping and the sound will be changing from slow to rapid, indicating the strength of detected signals.
SILENT DETECTION
· SH-055DR: Set the power switch to bottom SILENT mode.
· SH-055DRV: Set the power switch to bottom VIBRATING mode. · By earphone hearing.
ANALOG I DIGITAL select SWITCH
The signal of wireless camera, hidden microphone and walki talki (2-way radio) are analog signal. The signal of Bluetooth, WLAN, Wi-Fi, cellular phone and digital spread spectrum products are digital signal.
Usually, set the A-D switch to A. When to detect analog signals, the LED of the detector will light up without blinking and the buzzer will go off continuously.
When to detect digital signals, the LED of the detector will be blinking and the buzzer will go off discontinuously and small sound. Set the A-D switch to D, it will have stronger indication for the digital signals of Bluetooth, Wi-Fi, WLAN, cellular phone and Digital Spread Spectrum wireless products, etc.
SENSITIVITY ADJUSTMENT
Turn the Sensitivity Tuner to一(minus) side to decrease the sensitivity and the detecting distance will be shorter. Turn the Sensitivity Tuner to + (plus) side to increase the sensitivity and the detecting distance will be longer.
LOW BATTERY WARNING
If your detector is turned on, and the bottom LED (Red) lights up without blinking, it means the batteries run down. Please replace batteries.
INTERFERENCE (BACKGROUND NOISE) ELIMINATION
1. The Sensitivity tuner is also used to eliminate the background noise (interference).
2. If the scanned environment has other noises that interfere with your detector, the strength indication LED will be lit up.
3. If this condition appears, adjust the sensitivity by tuning the Sensitivity Tuner to一(minus) side to decrease the sensitivity until the Levell (Yellow) LED slightly lights up.
4. In normal condition, when to turn on the power, only the Power LED (Green) lights up to confirm the detector is in normal condition.
FEATURES
1. Detecting frequency from 50 MHz,.., 6.0 GHz covering all kinds of hidden cameras, bugs, cellular phones, Bluetooth and Wi-Fi, etc.
2. Fuzzy technique of multi-channel scanning.
3. Audio and light warning indicate the strength of detected signals.
4. Three kinds of detecting method for selection: Sound, Silent or Earphone hearing,t to use anytime, anywhere.
5. Advanced sensitivity tuner for background noise elimination and distance adjustment.
A NOTICE OF USE
1. If you are not going to use this device for a long time, remove the batteries to avoid damage caused by corrosion from battery leakage.
2. Unauthorized repair or disassembly of this device will void all the warranties.
3. Avoid water.
4. Do not store this device in an excessively hot place.
5. A void impact or dropping this device.
HOW TO DISTINGUISH IF IT IS A SIGNAL OF WIRELESS CAMERA or HIDDEN MICROPHONE or CELLULAR PHONE?
The signal wave of wireless camera and hidden
microphone is continuous wave, so the LED of the detector will light up without blinking when the detector detects a wireless camera or hidden microphone. And the buzzer will go off continuously.
The signal wave of cellular phone is pulse wave, so the LED of the detector will be blinking when the detector detects someone uses cellular phone. And the buzzer will go off discontinuously and in small sound.
SPECIFICATION
Power AAA / UM-4 battery x 2, 3V DC Detecting frequencies 50 MHz - 6.0 GHz
Dimension L87 x W 55 xH 24 mm
Weight 105g
Warning mode 1 Audible alarm and 3 LEDs
Warning mode 2 Silent, only 3 LEDs (SH-055DR) Vibration and 3 LEDs (SH-055DRV) Detecting Distance:
5.8GHz Wireless camera about 8 feet (regular 10m W) 2.4GHz Wireless camera about 20 feet (regular 10mW) Cellular phone仔) about 40 feet (set at Analog)
Cellular phoneρ) about 60 feet (set at Digital)
* Specifications may change without notice
WARNING
Use this device as an auxiliary, supplemental help or aid to prevent the risks caused by hidden camera, cellular phone or other wireless devices. This device does not take the place of all the supervisions. Performance of this Radio仕equency (RF) product will be affected by the circumstance of use. The producer and marketing group accepts no liability for any loss or damage by malfunction or misuse.
COPYRIGHT
No part of this manual may be reproduced, transmitted, transcribed, or translated into any language in any form by any means, electrical or mechanical, including photocopying, recording, or information and retrieval systems, without the express written permission of manufacturer. Products mentioned in this manual are for identification pu叩oses only. All brand names appearing in this manual mayor may not be registered trademarks or copyrights of their respective companies. The manufacturer reserves the right to change or modify the specifications of anyone or all of these products as deemed necessary at any time without prior notification. The manufacturer may further revise this manual from time to time without prior notice.
