1.1 upgrade the composition of documents
Upgrading of the document have the following composition:
1) files can be upgraded by DOWNLAOD folder of documents composed in whole or in part;
2) We upgrade code is constituted by two pieces of code: 3050 Abin0.bin + SPMP3050A.bin. Therefore, the upgrade of packaging paper, paper escalation in the DOWNLOAD \ A \ 3050Abin0.bin and DOWNLOAD \ SPMP3050A.bin appear to be paired, not only one;
3) If it is downloaded from the cvs on the code, before the package should be removed DOWNLOAD folder of all cvs documents.
1.2 upgrade paper packaging tools
Need to upgrade the paper through the tools FRM Pro 1.1.0 for the package.
1.3 upgrade the packing method documents
1) package of documents to the directory structure: A file folders and Firmware SPMP3050A.bin.
A directory of the document includes a section of the code 3050 Abin0.bin and resources folder RO_RES; B directory does not have to pack the contents;
SPMP3050A.bin for Firmware documents.
 
Figure 1 packing paper directory structure

2) designated path
 
Figure 2 designated path

3) the designated path Firmware
 
Figure 3 Firmware designated path


4) the choice of document resources
After you click select All A directory of all the documents will be turned into the red. 
 
Figure 4 select all the resources documents

5) Resource Generation SPCA556.BRN
 
Figure 5 generation SPCA556.BRN


6) Click on Create Card ISP will pop Figure 6
 
Figure 6 packaged choose dialog
Here we provided the package file names generated for SPCA556.BRN, please do not arbitrarily change the name of packaging paper. Its packaged form as follows:
a) If the resources and to upgrade the entire code, according to the paper choice, and use the Program All packaged manner.
b) To upgrade some of the resources and code, need to RO_RES folder, select some of the resources to update the documents, and the 3050 Abin0.bin + SPMP3050A.bin, and the use of F / W + Partial RSV approach to packaging.
c) can not separate here Firmware upgrades in the paper SPMP3050A.bin. The fact is we do not have the code stored in Firmware, A section of the code stored in the reserved areas. This two pieces of code are inseparable. We can not use F / W Only a package, this package of documents from the system will not work properly.
d) and c) above, because in the A reserves contain only the code of the code in 3050 Abin0.bin, so it can not be used for RSV All packaged;
e) the same before) above so it can not be used for packing Partial RSV.
On the final period, when the pack, 3050 Abin0.bin + SPMP3050A.bin must appear in pairs. And only use a) and b) in the form of packaging.
1.4 upgrade document storage path
Will generate paper copies of the SPCA556.BRN flash or SD card to the root directory..
1.5 upgrade method
   SPMP3050 tools used in the system upgrade feature upgrade.